HD Video Ground Loop Isolator for Coaxial Cable (GB106)
The Video Ground Loop Isolator GB106 is passive device which reduces Ground Loop Interference with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials. Differences in ground potentials are typically caused by unbalanced power line loads.
Features:
For HD-CVI/TVI/AHD
Built in Video filter, perfect to work with DVR to immunity DVR interference, for extra interference rejection
Passive, no power required
Prevents video-signal distortion caused by video ground loops
BNC male to BNC female with mini cable 25cm on both sides
Others same as Ground Loop Isolator function
Eliminates picture tearing, cross talk and rolling
Prevents power cables laid by others interfering with the CCTV system
Built in TVS (Transient Voltage Suppressors) for surge protection
Technical specifications:
HD Video Ground Loop Isolator for Coaxial Cable (GB106) | |
Model | GB106 |
Insertion Loss | 0.5dB |
Frequency Response | 20Hz- 10Mhz,+0/-3dB |
Input Resistance | 75 ohm |
Output Resistance | 75 ohm |
Isolation Voltage | 600VDC (Min) |
Insulation Resistance | 100M Ohm |
Transient Voltage Suppressor | 12 Vrms |
c (mm) | 55*28*20 with 25cm*2 cable |
Material | ABS Black |
Installation View
The Video Ground Loop Isolator should be installed where runs of video cable are known to have ground loops. It must be installed in the video cable that has come directly from the camera, but before the cable has been connected to anything else.
If several video cameras come from the same area, fix a Video Ground Loop Isolator In every cable, or a ground loop will still remain.
Our Qualifications: