8CH CCTV UTP Power Video Data Combiner HD-Tvi Balun (PVD308H)

8ch CCTV UTP Power Video Data Combiner HD-TVI Balun (PVD308H)
 
Description:
The Power Video Data Combiner Balun is passive transceiver device that combines video, PTZ data, and camera power over a single 8-pair UTP cable to simplify CCTV installations in a structured wiring environment. At the camera end the single channel PVD video balun combiner provides video, power and data on separate outputs.
The PVD308H series is designed to be installed at the control room. Each camera power output is equipped with a self-resetting fuse for extra protection. The PVD308 video connections are through BNC connectors and Coax cables to the DVR. The data connections to the DVR are through RJ45 and Category-5 cables.
 Features:

Features:

1. Combines video, power and data into a single RJ45 4-pair cable
2. Compatible with all HD-CVI, HD-TVI, HD-AHD
3. CVBS----Color video max up to 400m
4. No power required, simplified project wiring
5. Compatible with HDCVI/ HDTVI/ AHD
6. HD-AHD----720P: Color video max up to 350m, 1080P,4MP,5MP,8MP: Color video max up to 200m
7. HD-TVI----720P,1080P: Color video max up to 250m, 4MP,5MP,8MP: Color video max up to 200m
8. HD-CVI----720P: Color video max up to 400m, 1080P: Color video max up to 250m, 4MP,5MP,8MP: Color video max up to 200m
9. Plug and play, real-time transmit CCTV HD video signal video is high quality and stable
10. Anti-interference, super lighting protection, ESD
11. ABS outer shell, convenient to use in intensive project
12. Stackable Design, Plug-and-play for real-time, transmission, easier for installation
13. Compact size and easy installation
14. Built-in transient suppression protection
15. Outstanding interference rejection, transient protection
16. Indicated LED lights
17. Save cable cost 30%-50%
18. Voltage of power: 12V~36V
19. Power-Video signals are routed via UTP and RJ45. The unit is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire

Technical specifications:

The PVD system operates well with Cats or better UTP wire,24 AWG(0.5mm) or thicker.
Low voltage camera power video may be sent within same wire bundle.
Do not use shielded twisted-pair wire.
Do not use un-twisted wire.
Do not run 24V/28VAC within same wire bundle with telecom or other datacom signals
 
Power-Distance Chart
Using PVD products, cameras can be powered at extended distances, please refer to the ctart below for more information.

 
All RJ45 Connector follows industry-standard TIA/EIA 568B pinouts.